Milling Machine
EM-1460G / 1660G / 2065G
Features
1. Double nut-precision ball screw for X, Y and Z-axis. It keeps high precision and durability life of the machine.
2. X, Y, Z axis employ DC servo motors, providing variable feed speed change. Rapid feed rate offerss 2-3 times higher efficiency than frequency inverter controlled motor. Greater torque output at low-speed running. It can be fitted with an optional MPG hand wheel.
3. The automatic lubrication system adjusts the timing and flow to provide excellent lubricating oil onto all the sliding ways. When lubricant reaches control-limited, it rings and to remind you to fill oil.
4. Spindle head is gear type, and spindle nose is NT50#.
5. Available to equip with H type powerful horizontal cutting mechanism. Featuring gear head drive, servo motor drive on vertical feed, and hand wheel control for added operational convenience.
Specification
| ITEM | UNIT | EM-1460G | EM-1660G | EM-2065G |
|---|---|---|---|---|
| TRAVEL | ||||
| Longitudinal travel-X axis | mm | 1400 | 1600 | 2000 |
| Cross travel-Y axis | mm | 600 | 650 | 650 |
| Vertical travel-Z axis | mm | 600 / 700 / 800 / 900 | 600 / 700 / 800 / 900 | 600 / 700 / 800 / 900 |
| TABLE | ||||
| Table size | mm | 1702 x 510 | 1900 x 510 | 2450 x 580 |
| T-slot | mm | 4 x 18 x 80 | 4 x 18 x 80 | 5 x 18 x 95 |
| Table load | kgs | 1000 | 1000 | 1500 |
| Speed feed (X,Y,Z axis) | mm/min | 10-3000 | 10-3000 | 10-3000 |
| Rapid feed (X,Y,Z axis) | mm/min | 4800 | 4800 | 4800 |
| SPINDLE | ||||
| Spindle taper | - | NT#50 | NT#50 | NT#50 |
| Quill diameter | mm | φ128.57 | φ128.57 | φ128.57 |
| Spindle speed | rpm/min | 60Hz 125-1100 (6-step, 12 type) / 50Hz 104-1400 (6-step, 12 type) | 60Hz 125-1100 (6-step, 12 type) / 50Hz 104-1400 (6-step, 12 type) | 60Hz 125-1100 (6-step, 12 type) / 50Hz 104-1400 (6-step, 12 type) |
| Spindle nose to table | mm | 120-720 / 820 / 920 / 1020 | 120-720 / 820 / 920 / 1020 | 120-720 / 820 / 920 / 1020 |
| Spindle center to column | mm | 610 | 610 | 610 |
| MOTOR | ||||
| Spindle motor | mm | 10HP / 2P/ 4P | 10HP / 2P/ 4P | 10HP / 2P/ 4P |
| X,Y,Z axis servo motors | kw | 1.5 | 1.5 | 1.5 |
| Coolant pump | HP | 1/8 HP | 1/8 HP | 1/8 HP |
| Net weight | kgs | 4800 | 5000 | 6000 |